Linksys SPA-3102
From 2l2oWiki
Description
The SPA3102 supports one RJ-11 POTS (Plain Old Telephone Service) FXS port to connect an existing analog phone or fax machine. The SPA3102 also supports one PSTN FXO port to connect to a Telco or PBX circuit. The SPA3102 includes 2 100BaseT RJ-45 Ethernet interfaces to connect to a home or office LAN, as well as an Ethernet connection to a broadband modem or router. The SPA3102 FXS and FXO lines can be independently configured via software controlled by the service provider or the end user.
SPA-3102 Setup
Factory Reset the SPA-3102:
Attach a phone to the FXS port and dial the following:
**** <-- Enters the IVR
73738* <-- Factory Reset code
1 <-- You will be prompted to "Press '1' to continue".
The SPA-3102 will now reset.
SPA-3102 Web Administration:
Connect a PC to the LAN port on the SPA-3102.
Open a web browser to 192.168.0.1
Click on "Admin Login".
Click "Advanced".
Regional Tab
Remove the Vertical Service Activation Codes
PSTN Line Tab
Proxy: Your.Asterisk.Box
User ID: SOMEUSERNAME
Password: SOMEPASSWORD
Echo Supp Enable: No
Dial Plan 1: (S0<:DIDNUMBER>)
IF PASSING CID INFO: Dial Plan 1: (S0<:s>)
Dial Plan 2: (*x.|x.)
Line 1 VoIP Caller DP: 2
VoIP Caller Default DP: 2
PSTN Ring Thru Line 1: No
PSTN CID For VoIP CID: Yes
VoIP Answer Delay: (default 0) 1
PSTN Answer Delay: (default 16) 5
FXO Port Impedence: 220+820||120nf
SPA To PSTN Gain: (default 0) 5
PSTN To SPA Gain: (default 0) 5
FreePBX Trunk Setup:
Trunk Name: SOMEUSERNAME <-- USERNAME from SPA-3102 Config
Peer Details:
dtmfmode=rfc2833
secret=SOMEPASSWORD
host=dynamic
type=friend
username=SOMEUSERNAME
context=from-trunk
USER Context: LEAVE EMPTY
Asterisk Peer Setup:
[SOMEUSERNAME] <-- USERNAME from SPA-3102 Config
context=default <-- Choose the context depending on your dialplan
dtmfmode=rfc2833
secret=SOMEPASSWORD
host=dynamic
type=friend
username=SOMEUSERNAME
